{"product_id":"3d-printer-maintenance-kit-30ml-lubricant-25g-glue-stick","title":"3D Printer Maintenance Kit – Rail Lubricant \u0026 Bed Glue Stick","description":"\n\u003cp\u003eKeep your FDM 3D printer running at peak performance with this \u003cstrong\u003e2-in-1 Maintenance Kit\u003c\/strong\u003e — pairing a high-adhesion hotbed glue stick with a precision guide rail lubricant oil. Whether you're battling warped first layers or noisy linear rails, this kit has you covered from bed adhesion to smooth, silent motion.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eMade in Mainland China.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003e🖨️ What's in the Kit?\u003c\/h2\u003e\n\n\u003ch3\u003eProduct 1: 25g High-Adhesion 3D Printer Glue Stick\u003c\/h3\u003e\n\u003cp\u003eTired of prints lifting, warping, or refusing to release cleanly? This water-soluble solid glue stick creates a reliable bond between your filament and heated bed — then releases effortlessly once the bed cools down.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrong Bed Adhesion:\u003c\/strong\u003e Keeps edges flat and prevents warping during printing for PLA, ABS, PETG, TPU, and more.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy Model Release:\u003c\/strong\u003e No scrapers needed — your print simply pops off when the hotbed cools, protecting your build surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWater-Soluble \u0026amp; Easy to Clean:\u003c\/strong\u003e Rinse your PEI sheet or glass bed with warm water, or wipe clean with a damp cloth — zero residue.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSmooth Application:\u003c\/strong\u003e The 25g solid formula goes on evenly without clumping or build-up.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Surface Compatibility:\u003c\/strong\u003e Works on glass beds, PEI spring steel plates, PC stickers, and magnetic platforms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProduct 2: 30ml Linear Guide Rail Lubricant Oil\u003c\/h3\u003e\n\u003cp\u003eQuiet, smooth motion is the foundation of quality prints. This low-viscosity lubricant oil is formulated specifically for 3D printer linear rails, lead screws, and bearings.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecision Needle Dispenser:\u003c\/strong\u003e Includes a metal needle tip and protective cap for targeted, mess-free application — exactly where you need it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduces Friction \u0026amp; Noise:\u003c\/strong\u003e Eliminates grinding and squeaking on Z-axis rods and X\/Y linear rails for whisper-quiet operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Rust \u0026amp; Wear Protection:\u003c\/strong\u003e Guards MGN9, MGN12 linear rails and T8 lead screws against oxidation and wear, extending the life of your machine.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimal Viscosity:\u003c\/strong\u003e Penetrates deep into bearings without attracting dust like heavy greases do — keeps things clean longer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003e🛠️ How to Use\u003c\/h2\u003e\n\n\u003ch4\u003eGlue Stick\u003c\/h4\u003e\n\u003col\u003e\n  \u003cli\u003eEnsure your hotbed is clean and dry.\u003c\/li\u003e\n  \u003cli\u003eApply an even, thin layer of glue across the printing area before heating the bed.\u003c\/li\u003e\n  \u003cli\u003ePrint as normal. After every 3–5 prints, clean the bed with a warm damp cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003eGuide Rail Lubricant\u003c\/h4\u003e\n\u003col\u003e\n  \u003cli\u003eWipe away any old grease or dust from linear rails and lead screws.\u003c\/li\u003e\n  \u003cli\u003eApply 2–3 drops of oil directly onto the rail or screw thread using the needle tip.\u003c\/li\u003e\n  \u003cli\u003eMove the print head or Z-axis up and down several times to evenly distribute the lubricant.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003e✅ Compatible Printers\u003c\/h2\u003e\n\u003cp\u003eThis maintenance kit works with virtually all FDM 3D printers, including:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCreality Ender 3 series (V2, S1, Neo, V3 SE\/KE), CR-10\u003c\/li\u003e\n  \u003cli\u003eBambu Lab X1 Carbon, P1P, P1S, A1 Mini\u003c\/li\u003e\n  \u003cli\u003eAnycubic Kobra series, Vyper\u003c\/li\u003e\n  \u003cli\u003eElegoo Neptune series\u003c\/li\u003e\n  \u003cli\u003ePrusa i3 MK3S+, MK4\u003c\/li\u003e\n  \u003cli\u003eVoron, Kingroon, Artillery, and DIY machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003e📦 Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLubricant Volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30ml\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGlue Stick Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDispenser Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision Metal Needle Tip\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGlue Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-Soluble, High-Adhesion Solid\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, ABS, PETG, TPU\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRail Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMGN9, MGN12, T8 Lead Screws\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMainland China\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eFor more information on safe handling of lubricants and chemical products, refer to guidance from the U.S. Consumer Product Safety Commission (CPSC).\u003c\/p\u003e\n\n\u003cp\u003eLooking for more tools to enhance your 3D printing setup? Browse our related products:\u003cbr\u003e\n\u003ca href=\"\/products\/notebook-diary-clip-locks-10-pairs-diy-hardware-accessories\"\u003e10 Pairs Notebook Diary Clip Locks – DIY Hardware Accessories\u003c\/a\u003e\u003cbr\u003e\n\u003ca href=\"\/products\/1-4-hex-shank-wire-twister-drill-attachment-rebar-tie-wire-tool\"\u003e1\/4\" Hex Wire Twister Drill Attachment – Rebar Tie Wire Tool\u003c\/a\u003e\n\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eLearn more: \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Inkjet_printing\" target=\"_blank\" rel=\"noopener\"\u003eInkjet printing\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eQ: What surfaces is the 3D printer glue stick compatible with?\u003c\/h4\u003e\n\u003cp\u003eA: The glue stick works on a wide range of build surfaces including glass beds, PEI spring steel plates, PC sticker surfaces, and magnetic platforms. It's suitable for common filaments such as PLA, ABS, PETG, and TPU, making it a versatile addition to any FDM printer setup.\u003c\/p\u003e\n\n\u003ch4\u003eQ: How often should I apply the guide rail lubricant oil?\u003c\/h4\u003e\n\u003cp\u003eA: For most home and hobbyist printers, applying 2–3 drops of lubricant to your linear rails and lead screws every 1–3 months is sufficient, depending on print volume. If you notice increased noise or resistance in the axes, that's a good sign it's time to re-lubricate.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Will the glue stick leave residue or damage my build plate?\u003c\/h4\u003e\n\u003cp\u003eA: No. The formula is water-soluble, so it cleans off easily with warm water or a damp cloth. It will not harm glass, PEI, or other standard build surfaces and leaves no sticky residue when properly cleaned.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Is this lubricant oil safe to use on all 3D printer linear rail types?\u003c\/h4\u003e\n\u003cp\u003eA: Yes — the oil is designed for metal-on-metal linear guide systems such as MGN9 and MGN12 rails as well as T8 lead screws. Its low viscosity allows it to penetrate bearings cleanly without attracting debris, making it ideal for precision printer motion systems.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What surfaces is the 3D printer glue stick compatible with?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The glue stick works on a wide range of build surfaces including glass beds, PEI spring steel plates, PC sticker surfaces, and magnetic platforms. It's suitable for common filaments such as PLA, ABS, PETG, and TPU, making it a versatile addition to any FDM printer setup.\"}}, {\"@type\": \"Question\", \"name\": \"How often should I apply the guide rail lubricant oil?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For most home and hobbyist printers, applying 2–3 drops of lubricant to your linear rails and lead screws every 1–3 months is sufficient, depending on print volume. If you notice increased noise or resistance in the axes, that's a good sign it's time to re-lubricate.\"}}, {\"@type\": \"Question\", \"name\": \"Will the glue stick leave residue or damage my build plate?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The formula is water-soluble, so it cleans off easily with warm water or a damp cloth. It will not harm glass, PEI, or other standard build surfaces and leaves no sticky residue when properly cleaned.\"}}, {\"@type\": \"Question\", \"name\": \"Is this lubricant oil safe to use on all 3D printer linear rail types?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — the oil is designed for metal-on-metal linear guide systems such as MGN9 and MGN12 rails as well as T8 lead screws. Its low viscosity allows it to penetrate bearings cleanly without attracting debris, making it ideal for precision printer motion systems.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/oasis-select.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Crafts, DIY \u0026 Stationery\", \"item\": \"https:\/\/oasis-select.com\/collections\/crafts-diy-stationery\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"3D Printer Maintenance Kit – Rail Lubricant \u0026 Bed Glue Stick\", \"item\": \"https:\/\/oasis-select.com\/products\/3d-printer-maintenance-kit-30ml-lubricant-25g-glue-stick\"}]}\u003c\/script\u003e","brand":"Oasis Select","offers":[{"title":"2set","offer_id":47742996906089,"sku":"14:350850#2set","price":28.59,"currency_code":"USD","in_stock":true},{"title":"3PCS","offer_id":47742996938857,"sku":"14:1052#3PCS","price":23.48,"currency_code":"USD","in_stock":true},{"title":"3 bottles","offer_id":47742996971625,"sku":"14:366#3 bottles","price":25.52,"currency_code":"USD","in_stock":true},{"title":"1PC","offer_id":47742997004393,"sku":"14:193#1PC","price":28.53,"currency_code":"USD","in_stock":true},{"title":"1 bottle","offer_id":47742997037161,"sku":"14:29#1 bottle","price":28.53,"currency_code":"USD","in_stock":true},{"title":"1set","offer_id":47742997069929,"sku":"14:10#1set","price":28.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/7931\/3257\/files\/S2e095b2614c1463ca4b882938b7eafa7p.webp?v=1783012139","url":"https:\/\/oasis-select.com\/products\/3d-printer-maintenance-kit-30ml-lubricant-25g-glue-stick","provider":"Oasis Select","version":"1.0","type":"link"}