{"product_id":"flyingrc-f4-mini-fixed-wing-flight-controller-type-c","title":"FlyingRC F4 Mini Fixed Wing Flight Controller – Type-C USB","description":"\n\u003ch2\u003eFlyingRC F4 Wing Mini Fixed Wing Flight Controller with Type-C Interface\u003c\/h2\u003e\n\u003cp\u003eTake your micro fixed-wing builds to the next level with the \u003cstrong\u003eFlyingRC F4 Wing Mini Flight Controller\u003c\/strong\u003e. Engineered for small and ultra-compact fixed-wing aircraft, this featherweight board packs serious processing power into a 27.9 × 20.3 × 11.2 mm footprint — weighing just 2.8 g. Whether you're flying an F80, ArwingMini, micro claw, or a modified hand-throw glider, this flight controller delivers high-performance stability, precise sensor data, and flexible connectivity in one tidy package.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eMade in Mainland China.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowerful STM32F405RGT6 Processor:\u003c\/strong\u003e ARM Cortex-M4 core running at 168 MHz with 1 MB Flash — over 5× more capable than competing mini FCs that rely on STM32F0-series chips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eICM42605 Gyroscope:\u003c\/strong\u003e 3rd-generation TDK sensor purpose-optimized for drone flight dynamics, delivering smooth and responsive attitude control.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSPL06 Barometer:\u003c\/strong\u003e High-precision domestic barometer for reliable altitude hold and smooth flight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Onboard LDO Regulators:\u003c\/strong\u003e Sensors are independently powered, reducing electrical noise for consistently stable flight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e7× PWM Outputs:\u003c\/strong\u003e Drive up to 7 servos or ESCs simultaneously, plus 3.5 serial ports (SBUS counts as half a serial port).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-C Interface:\u003c\/strong\u003e Direct plug-in connection with superior durability and longevity. Connect to your smartphone via dual USB-C cables and configure via QGroundControl mobile app (AP firmware).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide Voltage Input (2.5–30V \/ 1–6S LiPo):\u003c\/strong\u003e Supports up to 6S battery input via SH1.0 2-pin interface, with battery voltage also powering the HD image transmission port.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHD Direct Plug-In Support:\u003c\/strong\u003e SH1.0 6-pin interface for HD OSD (compatible with Snail HD, OpenIPC, etc.). Note: analog OSD is not supported.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eELRS Receiver Ready:\u003c\/strong\u003e Direct plug-in for ELRS receivers to keep your build as compact as possible.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExternal I²C Ammeter Support:\u003c\/strong\u003e No onboard analog ammeter; connects to an external I²C protocol ammeter for current monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProcessor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSTM32F405RGT6 (ARM Cortex-M4, 168 MHz, 1 MB Flash)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGyroscope\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eICM42605 (TDK 3rd Gen)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarometer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSPL06\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5–30V (1–6S LiPo)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLogic Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePWM Outputs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSerial Ports\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5 (SBUS = 0.5)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB Type-C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e27.9 × 20.3 × 11.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.8 g\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × Flight Controller\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatible Platforms\u003c\/h3\u003e\n\u003cp\u003eDesigned for small and micro fixed-wing aircraft including F80, micro claw wings, ArwingMini, modified hand-throw gliders, and similar lightweight builds. Also compatible with ELRS receivers and HD video transmitters via direct plug-in connectors.\u003c\/p\u003e\n\n\u003ch3\u003eRelated Products You May Like\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/1-channel-relay-module-dc-3-3v-24v-optocoupler-arduino\"\u003e1-Channel Relay Module DC 3.3V–24V Optocoupler for Arduino\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/038-inch-1280x720p-micro-display-diy-hdmi-driver-board-kit\"\u003e0.38\" 1280×720P Micro Display DIY Kit with HDMI Driver Board\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/products\/0-25mm-1000-turn-precision-copper-inductor-coil-diy-electronics\"\u003e0.25mm 1000-Turn Precision Copper Inductor Coil for DIY Circuits\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information on safe operation of small unmanned aircraft systems, refer to guidance from the FAA Unmanned Aircraft Systems (UAS) resource center and electronics safety standards at CPSC.gov.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: Which fixed-wing aircraft is the FlyingRC F4 Wing Mini Flight Controller compatible with?\u003c\/h4\u003e\n\u003cp\u003eA: The FlyingRC F4 Wing Mini Flight Controller is designed for small and micro fixed-wing models such as the F80, ArwingMini, micro claw wing, and modified hand-throw gliders. Its compact 2.8 g form factor makes it ideal for ultra-lightweight builds where space and weight are critical.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Can I configure the FlyingRC F4 Wing Mini Flight Controller with a smartphone?\u003c\/h4\u003e\n\u003cp\u003eA: Yes! Thanks to the USB Type-C interface, you can connect the flight controller to your smartphone using a dual USB-C cable and configure it through the QGroundControl mobile app (recommended with AP firmware). This makes field adjustments quick and convenient without needing a laptop.\u003c\/p\u003e\n\n\u003ch4\u003eQ: Does this flight controller support HD video transmission and OSD?\u003c\/h4\u003e\n\u003cp\u003eA: Yes, the board features an SH1.0 6-pin HD direct plug-in port that supports HD OSD systems such as Snail HD and OpenIPC. Please note that analog OSD is not supported. Battery voltage from the SH1.0 2-pin connector also powers the HD image transmission port, supporting up to 6S input.\u003c\/p\u003e\n\n\u003ch4\u003eQ: What receiver types are compatible with this flight controller?\u003c\/h4\u003e\n\u003cp\u003eA: The FlyingRC F4 Wing Mini supports SBUS receivers via its serial ports and includes a direct plug-in connector for ELRS receivers, helping you keep your build as compact as possible. External I²C protocol ammeters can also be connected for current monitoring.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Which fixed-wing aircraft is the FlyingRC F4 Wing Mini Flight Controller compatible with?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The FlyingRC F4 Wing Mini Flight Controller is designed for small and micro fixed-wing models such as the F80, ArwingMini, micro claw wing, and modified hand-throw gliders. Its compact 2.8 g form factor makes it ideal for ultra-lightweight builds where space and weight are critical.\"}}, {\"@type\": \"Question\", \"name\": \"Can I configure the FlyingRC F4 Wing Mini Flight Controller with a smartphone?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes! Thanks to the USB Type-C interface, you can connect the flight controller to your smartphone using a dual USB-C cable and configure it through the QGroundControl mobile app (recommended with AP firmware). This makes field adjustments quick and convenient without needing a laptop.\"}}, {\"@type\": \"Question\", \"name\": \"Does this flight controller support HD video transmission and OSD?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, the board features an SH1.0 6-pin HD direct plug-in port that supports HD OSD systems such as Snail HD and OpenIPC. Please note that analog OSD is not supported. Battery voltage from the SH1.0 2-pin connector also powers the HD image transmission port, supporting up to 6S input.\"}}, {\"@type\": \"Question\", \"name\": \"What receiver types are compatible with this flight controller?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The FlyingRC F4 Wing Mini supports SBUS receivers via its serial ports and includes a direct plug-in connector for ELRS receivers, helping you keep your build as compact as possible. External I²C protocol ammeters can also be connected for current monitoring.\"}}]}\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/oasis-select.com\/\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Electronics \u0026 Tech\", \"item\": \"https:\/\/oasis-select.com\/collections\/electronics-tech\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"FlyingRC F4 Mini Fixed Wing Flight Controller – Type-C USB\", \"item\": \"https:\/\/oasis-select.com\/products\/flyingrc-f4-mini-fixed-wing-flight-controller-type-c\"}]}\u003c\/script\u003e","brand":"Oasis Select","offers":[{"title":"black \/ CN","offer_id":47751148503145,"sku":"14:193#black;200007763:201441035#CN","price":77.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/7931\/3257\/files\/S065ad14b9f3942689534c92f10dba86b2.webp?v=1783181845","url":"https:\/\/oasis-select.com\/products\/flyingrc-f4-mini-fixed-wing-flight-controller-type-c","provider":"Oasis Select","version":"1.0","type":"link"}