100Pcs 3mm Piranha Super Flux LED Beads | 4-Pin Wide Angle DIY

Light up your next project with these 100-piece 3mm Piranha Super Flux LED Diode Beads. With a wide 30° viewing angle, ultra-bright output, and energy-efficient design, these compact 4-pin LEDs are the go-to choice for DIY electronics, landscape lighting, signage, holiday décor, and architectural displays. Available in multiple colours — White, Warm White, Red, Green, Blue, and Yellow — there's a perfect shade for every creative application.

Key Features

• Ultra-bright performance: High-luminosity output with a clear water lens for maximum light transmission.
• Energy efficient: Low 0.06W power consumption saves up to 40% energy compared to conventional bulbs.
• Low operating voltage: 2V–2.2V (Red/Yellow) and 3.0–3.2V (White/Green/Blue) for safe, stable operation.
• Wide viewing angle: 30° beam spread delivers focused, even illumination.
• Instant-on: Near-zero response time for immediate full brightness.
• Long service life: Durable construction minimises replacement and maintenance costs.
• Compact 3mm dome lens: Transparent, round lens fits tight spaces and intricate layouts.
• 4-pin configuration: Anode (long pin) and cathode (short pin) clearly marked for easy wiring.

Specifications

Applications

• DIY electronics and hobbyist circuit projects
• Landscape and garden lighting accents
• Architectural and concealed lighting
• Signage, billboards, and advertising displays
• Neon letter and channel letter illumination
• Holiday décor, event lighting, and festive displays
• Home interior and mood lighting
• Emergency and security indicator lighting

What's in the Box

100 × 3mm Piranha Super Flux Diode LED Beads (colour as selected)

Usage Tips

• Plan your layout carefully to ensure correct polarity alignment before soldering.
• Always use a current-limiting resistor or driver that matches the forward voltage and 20mA current rating.
• Experiment with colour combinations and angles to achieve your desired lighting effect.
• Avoid exceeding rated voltage to prevent damage.
• Ensure adequate heat dissipation during extended use.

Explore Related Products

• 0.25mm 1000-Turn Precision Copper Inductor Coil for DIY Circuits
• 1-Channel Relay Module DC 3.3V–24V Optocoupler for Arduino
• 0.38" 1280x720P Micro Display DIY Kit with HDMI Driver Board

For guidance on LED safety standards and general electrical component usage, visit the U.S. Consumer Product Safety Commission – Lighting Safety.

Frequently Asked Questions

Q: What is a Piranha Super Flux LED and how does it differ from a standard 3mm LED?

A: A Piranha Super Flux LED features a 4-pin square base instead of the 2-pin round base found on standard 3mm LEDs. This design provides greater mechanical stability, better heat dissipation, and allows for a wider beam angle, making them ideal for signage, backlighting, and high-density DIY lighting arrays.

Q: What resistor do I need to use with these 3mm Piranha LED beads?

A: The resistor value depends on your supply voltage. For a 5V supply with Red/Yellow LEDs (2.0–2.2V forward voltage at 20mA), use approximately a 150Ω resistor. For White/Green/Blue LEDs (3.0–3.2V forward voltage) on a 5V supply, use approximately a 100Ω resistor. Always use Ohm's Law (R = (Vs – Vf) / I) to calculate the exact value for your circuit.

Q: Are these LEDs suitable for outdoor landscape and garden lighting projects?

A: Yes — their compact size, low operating voltage, and durable construction make these LEDs well-suited for landscape accent lighting, garden path markers, and outdoor decorative displays. Ensure all connections and drivers are properly weatherproofed when used outdoors.

Q: Can I mix colours in a single circuit?

A: Yes, but keep in mind that Red and Yellow LEDs have a lower forward voltage (2.0–2.2V) than White, Green, and Blue LEDs (3.0–3.2V). Mixing them in a single series string is not recommended; instead, wire each colour group in its own parallel branch with an appropriate current-limiting resistor for each group.