326Pcs Tile Leveling System – Spacers, Wedges & Plier Kit

Get Perfectly Level Tiles Every Time – No More Lippage!

Whether you're tackling a bathroom floor, kitchen backsplash, or outdoor patio, the SLADE 326-Piece Tile Leveling System makes professional-quality tile installation achievable for any DIYer or seasoned contractor. This all-in-one kit ensures every tile sits flush and even, eliminating unsightly lippage and uneven edges for a flawless, flat surface every time.

Made in Mainland China.

What's in the Box (326 Pieces Total)

• 25 × Tile Levelers – Reusable T-shaped needle levelers for consistent pressure across tile edges
• 1 × Special Wrench – Tighten caps quickly and with even torque
• 100 × 1mm Leveling Crosses – Ideal for seamless tiles and polished tiles
• 100 × 2mm Leveling Crosses – Perfect for standard wall tiles and floor tiles
• 100 × 3mm Leveling Crosses – Great for antique bricks and outdoor pavers

Key Features & Benefits

• ✅ Virtually lippage-free results – keeps tiles on the same horizontal plane during curing
• ✅ Wear-resistant & reusable – PP + 430 stainless steel construction built to last
• ✅ 3-spacer variety included – covers 1mm, 2mm & 3mm joint widths for versatile applications
• ✅ Works on floors & walls – suitable for both horizontal and vertical tile installations
• ✅ Reduces installer fatigue – no more manually checking and adjusting every tile by eye
• ✅ Speeds up installation – set, level, cure, and remove in a few simple steps
• ✅ Minimizes grinding & polishing – flat surface means less post-installation correction
• ✅ Easy DIY operation – intuitive system suitable for beginners and professionals alike

Specifications

How to Use

1. Lay your first tile and leave an appropriate gap distance using the cross spacers.
2. Insert the T-shaped needle into the gap along the tile edge.
3. Rotate the T-needle 180° so it locks beneath the two adjacent tiles.
4. Tighten the cap by hand or with the included wrench until both tiles are perfectly flush.
5. After 4–6 hours (before adhesive fully cures), rotate the cap in reverse and pull out the T-needle. The cross spacers break off cleanly at grout level.

Related Products You May Like

• 10-Pack Bamboo Charcoal Soft Toothbrush Set – Deep Clean
• 1-Inch Impact Rocker Sprinkler – Adjustable Rotating Irrigation

For more guidance on safe tool use in home improvement projects, visit the U.S. Consumer Product Safety Commission – Home Improvement Safety.

Frequently Asked Questions

Q: Can the tile leveling spacers and wedges be reused?

A: Yes! The T-shaped leveler needles and wrench are designed to be reused multiple times. The plastic cross spacers are single-use — they break off cleanly beneath the grout line once the adhesive cures. This makes the kit great value for multi-room or ongoing tiling projects.

Q: What tile thicknesses and joint widths does this tile leveling system support?

A: This system is compatible with tile thicknesses from 5mm to 20mm (0.2–0.79 in) and spacer joint widths from 2mm to 8mm (0.08–0.31 in). The three included leveling cross sizes (1mm, 2mm, and 3mm) make this kit versatile for seamless polished tiles, standard wall and floor tiles, and larger antique or outdoor pavers.

Q: Is this tile leveling system suitable for both floor and wall tile installation?

A: Absolutely. The SLADE leveling system works on both horizontal floor installations and vertical wall tile applications. It keeps tiles perfectly aligned on the same plane while the adhesive or cement cures, preventing any movement or lippage regardless of orientation.

Q: How long should I wait before removing the leveling clips?

A: It is recommended to wait approximately 4–6 hours after leveling before removing the T-shaped needles. You should remove them before the cement or tile adhesive is completely dry — this makes removal easier and ensures the cross spacer breaks off cleanly at the base without damaging the tile surface.