433MHz Wireless Remote Wall Switch 1/2/3 Gang 10A 110V-220V

Take Control of Your Lighting — Without Running New Wires

The GGBEE 433MHz Wireless Remote Control Wall Switch lets you control your lights and ceiling fans from up to 25 metres away — no smart hub, no Wi-Fi, no complicated setup required. Available in 1-gang, 2-gang, and 3-gang configurations, this versatile switch fits standard 86-type wall panels and works with LED, CFL, fluorescent lamps, and more. Made in Mainland China.

Key Features

• 433MHz RF Technology — Reliable wireless signal with up to 25m (82ft) range through walls and doors
• 1, 2 or 3 Gang Options — Control one, two, or three separate lights or fans from a single switch panel
• Universal Voltage — Works on 110V and 220V systems, suitable for US, EU, and AU homes
• High Load Capacity — Handles up to 300W for LED/CFL/fluorescent lights, and up to 2500W for other loads
• EV1527 Learning Code Chip — Pairs easily with most learning-code receivers; one switch can control multiple receivers
• Stick-On or Wall-Mount — The 86-type panel can be fixed to any surface with no wiring required for the transmitter
• 10A Rated Current — Robust and safe for everyday household use
• CE Certified — Tested for safety compliance
• 1-Year Warranty — Backed by manufacturer warranty for peace of mind

Compatible With

• LED bulbs & LED strip lights
• CFL & fluorescent lamps
• Ceiling fans
• Standard incandescent bulbs
• Any learning-code RF receiver (EV1527 protocol)

Specifications

How to Pair the Switch (Get Signal)

1. Press the learning button on the Receiver twice, then wait 3 seconds.
2. Press any button on the remote/switch transmitter, then wait 3 seconds. Pairing is complete!

How to Clear the Signal

1. Press the learning button on the Receiver 8 times, then wait 3 seconds. All stored codes are cleared.

Related Products You May Like

• 1-Channel SCR Solid State Relay Module DC3-24V 40A Optocoupler
• 10-Pack 12V 3-Pin PC Fan Extension Cable 26cm – CPU GPU Cooler

For more information on home electrical safety and smart lighting standards, visit the U.S. Consumer Product Safety Commission — Electrical Safety Guide.

Frequently Asked Questions

Q: Does the 433MHz wireless wall switch require any wiring or a neutral wire?

A: The remote transmitter (wall switch panel) requires no wiring — it simply sticks onto any surface. The receiver module does need to be wired in-line with your existing light circuit. No neutral wire is required for most standard installations.

Q: Will this wireless light switch work with my existing LED bulbs?

A: Yes! The GGBEE 433MHz wireless switch is fully compatible with LED, CFL, and fluorescent lamps up to 300W, as well as other load types (such as incandescent bulbs or ceiling fans) up to 2500W.

Q: Can one remote switch control multiple lights or receivers?

A: Absolutely. You can pair a single 433MHz remote switch transmitter with multiple receivers, allowing you to control different lights or zones from the same switch — ideal for open-plan rooms or multi-room setups.

Q: What is the wireless range of this remote wall switch?

A: The switch has a wireless range of up to 25 metres (approximately 82 feet). Signal may pass through standard interior walls, though thick concrete or metal structures may reduce range.

Q: Is this switch compatible with both 110V and 220V electrical systems?

A: Yes — the GGBEE wireless switch supports both 110V and 220V AC systems, making it suitable for use in North America, Europe, Australia, and other regions worldwide.