Mini LED Cabinet Sensor Switch 12V 24V – Touch, PIR & Door

Smart LED Cabinet Light Sensor Switch – 4-in-1 Control Modes

Upgrade your kitchen cabinets, wardrobes, cupboards, and under-shelf lighting with this compact Mini LED Cabinet Light Sensor Switch. Compatible with 12V–24V DC LED lighting systems, this versatile sensor lets you choose from four intuitive control modes: Hand Sweep, Touch, PIR Motion, or Door Open/Close. Made in Mainland China, it delivers smart hands-free convenience in a sleek 15mm form factor.

Choose Your Control Mode

✋ Hand Sweep Sensor

• Working Voltage: 12V–24V DC
• Sensing Distance: 3–5 cm
• Wave your hand to toggle lights on or off — no physical contact needed
• Swipe upward or downward to smoothly dim or brighten with no limit
• Size: Ø15mm × 11mm | Mounting hole: 12mm

👆 Touch Sensor

• Working Voltage: 12V–24V DC
• Tap lightly to turn lights on or off with ease
• Hold touch for seamless, stepless dimming control
• Size: Ø15mm × 11mm | Mounting hole: 12mm

🚶 PIR Motion Sensor

• Working Voltage: 12V–24V DC
• Detection Range: 1–3 metres
• Lights activate automatically when motion is detected; turns off 30 seconds after activity stops
• Size: Ø15mm × 11mm | Mounting hole: 12mm

🚪 Single Door Sensor

• Working Voltage: 12V–24V DC
• Light turns on when the door opens and switches off automatically when closed
• Ideal for wardrobes, cupboards, and display cabinets
• Size: Ø15mm × 11mm | Mounting hole: 12mm

Key Features

• ✅ Four sensor modes in one compact design
• ✅ Works with 12V and 24V DC LED cabinet lighting systems
• ✅ Minimal 15mm diameter — fits neatly into standard 12mm mounting holes
• ✅ Plastic housing — lightweight and durable
• ✅ Perfect for kitchens, wardrobes, display cabinets, shelving & more
• ✅ Easy DIY installation

Package Contents

• 1 × LED Cabinet Light Sensor Switch (your chosen mode)

Important Notes

• Product images are for illustration purposes — please refer to the dimensions listed in this description for accurate sizing.
• Minor measurement differences may occur due to manual measuring.
• Screen colour calibration may cause slight colour variation from the actual product.

You May Also Like

Looking to enhance your home lighting setup? Check out these related products:

• 1-Channel SCR Solid State Relay Module DC3-24V 40A Optocoupler
• 10-Pack 12V 3-Pin PC Fan Extension Cable 26cm – CPU GPU Cooler

For general electrical safety guidance when installing low-voltage lighting in your home, visit the U.S. Consumer Product Safety Commission – Electrical Safety.

Frequently Asked Questions

Q: What voltage does this LED cabinet light sensor switch require?

A: This sensor switch is compatible with 12V to 24V DC systems, making it suitable for most standard LED cabinet lighting setups. Simply match it to your existing power supply.

Q: Can I use this sensor to dim my LED cabinet lights?

A: Yes! Both the Hand Sweep and Touch sensor modes support stepless dimming. For hand sweep, swipe upward or downward to adjust brightness. For the touch sensor, hold your finger on the sensor to dim or brighten smoothly.

Q: How do I install this sensor switch into my cabinet?

A: Installation is straightforward. The sensor has an outside diameter of 15mm and a height of 11mm. If you need to create a mounting hole, drill a 12mm hole in your cabinet panel, insert the sensor, and connect it to your existing 12V–24V LED lighting circuit.

Q: How long does the PIR motion sensor stay on after detecting movement?

A: The PIR sensor will keep the lights on while motion is detected within a 1–3 metre range, and automatically switches off approximately 30 seconds after no further movement is detected.

Q: Is the door sensor suitable for wardrobes and cupboards?

A: Absolutely. The door sensor mode is designed specifically for enclosed spaces like wardrobes, kitchen cupboards, and storage cabinets. The light comes on when the door is opened and turns off automatically when it is closed.