400W Pellet Stove Igniter for Enviro & Vistaflame | 50-619 & 20-022

Pellet Stove Igniter – 400W Replacement for Enviro & Vistaflame Stoves

Keep your pellet stove running at peak performance with this premium-quality aftermarket igniter. Designed as a direct replacement for Enviro and Vistaflame pellet stove models, this 400W igniter is brand new, never used, and crafted from durable materials for long-lasting reliability. With easy female spade connectors and a straightforward installation process, this part gets your stove back up and running fast — no special tools required.

Key Features

• Brand New — Never used, straight out of the box
• Premium Materials — Built for durability and consistent performance
• Easy Installation — Female spade connectors for plug-and-play replacement
• Direct OEM-Style Fit — Replaces part numbers 50-619 & 20-022
• Rated 400W / 120V — Optimal wattage for efficient ignition
• Compact Size — 4.6" length × 3/8" width for a precise fit

Specifications

Compatible Models

Enviro Pellet Stoves:

• EF5
• Empress FS
• Empress Insert
• Milan
• Mini
• Windsor

Vistaflame Pellet Stoves:

• VF Windsor

How to Check If Your Igniter Needs Replacing

Not sure if your igniter has failed? Here are three easy ways to verify:

1. Visual Check: Start your stove and look for an orange glow at the burn pot. No glow? Your igniter may need replacing.
2. Heat Check: After the stove has been running for a few minutes, carefully feel around the burn pot area for warmth. No heat generated indicates a failed igniter.
3. Multimeter Test: Remove the igniter from the stove and use a Digital Multi-Meter (DMM) to measure resistance. A healthy igniter reads approximately 46Ω (±10%). A very low reading (single digits) suggests an internal short; a reading far above spec may indicate an out-of-range unit.

Package Contents

• 1× Pellet Stove Igniter (400W, 120V)

For more information on safe home heating practices and fireplace safety, visit the U.S. Consumer Product Safety Commission – Fireplace & Heater Safety.

You May Also Like

• 1-Inch Threaded Brass Ball Valve – Water, Gas & Oil Flow Control
• 1-Channel Relay Module DC 3.3V–24V Optocoupler for Arduino

Learn more: United States Stove Company

Frequently Asked Questions

Q: What pellet stove models is this igniter compatible with?

A: This 400W pellet stove igniter is compatible with several Enviro and Vistaflame models, including the Enviro EF5, Empress FS, Empress Insert, Milan, Mini, Windsor, and the Vistaflame VF Windsor. It replaces OEM part numbers 50-619 and 20-022.

Q: How do I install this pellet stove igniter?

A: Installation is straightforward. Remove the old igniter from the burn pot by disconnecting the female spade connectors, then slide out the igniter. Insert the new 400W igniter into the same position, reconnect the spade connectors securely, and your stove is ready to fire up. Always ensure the stove is fully powered off and cooled down before beginning any maintenance.

Q: How do I know my igniter resistance is correct?

A: Using a Digital Multi-Meter (DMM), measure the resistance across the igniter terminals. A healthy reading should be approximately 46 ohms, plus or minus 10%. A very low reading (single-digit ohms) indicates an internal short, meaning the igniter needs replacement. This unit tests well within that range when new.

Q: Does this igniter come with a warranty?

A: Yes, this igniter comes with a 12-month manufacturer's limited warranty covering defective items. Accessories are covered for 3 months. Defective items must be reported within the warranty period with your order number and a description of the defect.