Solar RGB Strobe Car Warning Light | 11 Modes, Anti-Collision LED

Solar-Powered RGB Strobe Warning Light for Cars

Enhance your nighttime driving visibility with the SHINEKNOT Solar RGB Car Strobe Warning Light. This innovative, wire-free safety lamp mounts directly to your windshield via suction cup and charges itself using solar energy — no cables, no maintenance, no hassle. Whether you're driving in low-light conditions or parked on the roadside, this multifunction LED light keeps you seen and helps prevent collisions.

Made in Mainland China.

Why You'll Love It

• Solar + USB Charging (Model B): Model A runs on solar power only; Model B supports both solar and USB 5V charging for versatile, always-ready use.
• 11 Selectable Flash Modes: Choose from automatic color-cycling or fixed modes to suit any situation — slow pulse, rapid strobe, and more.
• Intelligent Light & Motion Control: Built-in light sensor means the lamp stays off in bright environments to conserve battery. Vibration detection auto-activates the light when the vehicle is in motion and shuts it off within 30 seconds of parking.
• Brilliant RGB LED Output: High-luminosity LEDs (2,000–82,000 lux) deliver eye-catching, multi-color strobe effects that dramatically improve your vehicle's visibility at night.
• Easy Suction-Cup Installation: No wiring or tools needed. Slightly dampen the suction cup for a stronger hold, position on your front or rear windshield, adjust the angle, and lock in place.
• ABS Body & Lithium Battery: Durable ABS housing with a built-in rechargeable lithium battery — batteries are included and pre-installed.
• CE & CCC Certified: Meets internationally recognised electrical safety standards.
• 3-Year Warranty: Shop with confidence backed by a full 3-year manufacturer warranty.

Specifications

How to Install

1. Connect the suction cup to the lamp body and adjust the nut to the desired tightness.
2. Slightly dampen the suction cup, then press it firmly onto the inside of your front or rear windshield.
3. Adjust the product angle to your preferred position, then lock the base and tighten the nut securely.
4. Switch on — the light enters classic slow-flash mode. Light control, vibration sensing, and 30-second auto-off are all active by default.
5. Press the Mode button to cycle through 11 flash modes or set a fixed colour.

Note: If the lamp does not illuminate in a dark environment, the battery simply needs recharging. Place the solar panel in direct sunlight for a few hours and it will return to normal operation.

Related Products You May Like

• 1-Channel Relay Module DC 3.3V–24V Optocoupler for Arduino
• 1.1M Eagle Hawk Kite Bird Scarer – Visibility & Safety for Outdoors

For more information on road safety standards and vehicle lighting regulations, visit the National Highway Traffic Safety Administration (NHTSA). You can also find general consumer product safety guidance at CPSC.gov.

Learn more: Strobe light

Frequently Asked Questions

Q: Does the solar car strobe warning light work without direct sunlight?

A: Yes — the built-in lithium battery stores solar energy so the light can operate at night after charging during the day. Model B also supports USB 5V charging, making it easy to top up the battery indoors or via a car USB port.

Q: How many flash modes does this RGB car warning light have?

A: There are 11 selectable modes. You can choose an automatic color-changing mode or lock in a specific colour/pattern using the Mode button. This gives you flexibility for both decorative and safety-oriented use.

Q: Will the light turn on automatically while I'm driving at night?

A: Yes. The intelligent light and vibration sensors detect low-light conditions and vehicle movement, automatically activating the strobe. When the vehicle stops, the light turns itself off within 30 seconds, conserving battery life.

Q: Is installation difficult? Do I need to wire anything?

A: No wiring is required at all. Simply attach the suction cup to your windshield (slightly dampening it improves grip), adjust the angle, and lock the nut. The entire setup takes under a minute.