326-Pc Tile Leveling System – Spacers, Wedges & Wrench Kit

Get Perfectly Flat Tiles Every Time – No More Lippage!

Say goodbye to uneven, lippage-plagued tile jobs. The Zimir 326-Piece Tile Leveling System gives DIYers and professional tilers everything they need to lay flawlessly flat floors and walls with confidence. With three different cross spacer sizes included, this versatile kit handles everything from seamless polished tiles to rugged outdoor bricks.

Made in Mainland China.

What's in the Box? (326 Pieces Total)

• 25 × Tile Leveler Clips – reusable T-pin leveling bases
• 1 × Tightening Wrench – for fast, effortless cap adjustment
• 100 × 1mm Leveling Cross – ideal for seamless & polished tiles
• 100 × 2mm Leveling Cross – perfect for standard wall & floor tiles
• 100 × 3mm Leveling Cross – great for antique bricks & outdoor tiles

Key Features & Benefits

• ✅ Virtually Lippage-Free Results – keeps every tile on the same level plane
• ✅ Wear-Resistant & Reusable – built from durable PP + 430 stainless steel
• ✅ 3 Cross Spacer Sizes – 1mm, 2mm & 3mm for versatile applications
• ✅ Faster Installation – significantly improves tiling speed
• ✅ Reduces Installer Fatigue – easy-twist caps and ergonomic wrench
• ✅ Prevents Tile Movement – holds tiles firmly while adhesive cures
• ✅ Reduces Grinding & Polishing – achieve a flat surface the first time
• ✅ DIY Friendly – simple 5-step process anyone can master

Technical Specifications

How to Use – 5 Easy Steps

1. Lay the first tile, leaving an appropriate gap using cross spacers.
2. Insert the T-shaped needle along the tile gap.
3. Rotate 180° so the T-pin locks under the two adjacent tiles.
4. Tighten the cap by hand or with the included wrench until both tiles are level.
5. After 4–6 hours (before adhesive is fully cured), reverse-rotate the cap 180° and remove the T-needle cleanly.

Works Great For

• Bathroom & kitchen floor tiling
• Feature wall tiles & backsplashes
• Outdoor paving & antique brick installation
• Large-format polished & porcelain tiles
• Professional contractors & dedicated DIYers

For general tile installation safety guidelines, visit the U.S. Consumer Product Safety Commission (CPSC).

Looking for more handy tools to complete your project? Check out our 14-Piece Multifunctional Slicer Set or pick up a 100-Pack Disposable Nitrile Gloves to keep your hands protected while tiling.

Learn more: Roof tiles

Frequently Asked Questions

Q: Are the tile leveling spacers reusable or single-use?

A: The 25 tile leveler clips and the wrench are designed to be reusable. The plastic leveling cross spacers (1mm, 2mm, 3mm) are single-use consumables that remain under the tile grout line after installation, which is standard practice in all tile leveling systems.

Q: What tile thickness is compatible with this leveling system?

A: This tile leveling kit is compatible with tiles ranging from 5mm to 20mm thick (0.2″ to 0.79″), making it suitable for most standard floor tiles, wall tiles, porcelain slabs, and outdoor pavers.

Q: How long should I wait before removing the leveler clips?

A: Wait approximately 4 to 6 hours after laying the tiles. Before the adhesive or cement fully cures, rotate the cap in reverse 180° and gently pull out the T-needle. Removing them before the adhesive fully sets ensures a clean break with no damage to the tile surface.

Q: Can this system be used for both floor and wall tiles?

A: Yes! The Zimir tile leveling system works on both horizontal floor installations and vertical wall tile applications. The three included cross spacer sizes (1mm, 2mm, 3mm) give you flexibility for different tile types and joint widths.