Universal 12V/24V EPB Caliper Motor Release & Brake Reset Tool

Universal 12V/24V Electronic Parking Brake (EPB) Caliper Motor Release Tool

Take full control of DC motor testing and electronic parking brake resets — no computer, no diagnostic software required. This portable 12V/24V Universal DC Motor Test & EPB Reset Tool lets you service windows, wipers, blowers, tailgates, lift pumps, and caliper motors on cars and trucks with a simple one-button flip switch. Perfect for professional mechanics and savvy DIYers who need a reliable, standalone solution for emergency brake release and motor fault diagnosis.

Made in Mainland China.

Key Features

• No Computer Needed: Completely standalone operation — no OBD adapter, laptop, or diagnostic software required.
• Dual Voltage Support: Works with both 12V (passenger cars) and 24V (trucks & buses) DC systems.
• Bidirectional Motor Control: One flip switch controls forward and reverse rotation for precise testing and caliper retraction.
• Reverse Polarity Protection: Built-in protection circuit guards against accidental reverse battery connections.
• Universal Compatibility: Includes multi-specification test terminal cable set to fit the vast majority of vehicle motor plugs.
• Safe & Stable Operation: Middle (neutral) switch position cuts power instantly, stopping the motor immediately.
• Durable ABS Construction: Rugged black-and-red housing built for workshop and roadside use.

What's in the Box

• 1 × Control Unit with bidirectional control switch
• 1 × Battery Clip Cable Set (red/black alligator clips)
• 1 × Multi-specification Test Terminal Cable Set

Specifications

How to Use

1. Preparation: Turn off the vehicle and disconnect the motor plug from the vehicle control module.
2. Power Connection: Connect the red alligator clip to the battery positive (+) and the black clip to the negative (−). Ensure the switch is in the neutral (middle) position.
3. Terminal Connection: Select the matching test terminal for your motor's plug type and connect to the motor pins.
4. Test/Release: Flip the switch to "↑" for forward or "↓" for reverse. Return to middle to stop. Never run continuously beyond 30 seconds.
5. Wrap Up: Return the switch to neutral, disconnect terminals, then battery clamps. Reconnect the motor to the vehicle.

Safety Precautions

• Never exceed 24V DC input — higher voltages will damage the tool irreversibly.
• Do not use near fuel, gas leaks, or in flammable environments.
• Keep hands clear of moving parts (windows, wipers, tailgates) during testing.
• Do not disassemble or modify the control unit.

Related Products You May Like

• 100-Pack Disposable Nitrile Gloves – Latex-Free, White, Oil-Proof – keep your hands clean during repairs.
• 120ml Heavy-Duty Metal Rust Remover & Anti-Rust Spray – protect brake components from corrosion.

Authoritative Resource

For guidance on automotive repair safety practices, visit the OSHA Automotive Service and Repair Safety page.

Frequently Asked Questions

Q: Does this EPB caliper motor release tool work without a diagnostic computer or OBD scanner?

A: Yes — that is its primary advantage. This tool is completely self-contained and requires no computer, laptop, OBD interface, or proprietary software. Simply connect it to the vehicle battery and use the flip switch to retract or extend the EPB caliper motor manually.

Q: Which vehicles and motors is this 12V/24V motor test tool compatible with?

A: It is universally compatible with the vast majority of 12V passenger cars (window lifts, wipers, blowers, EPB calipers) and 24V trucks and buses (wipers, tailgates, lift pumps). The included multi-specification terminal cable set adapts to most motor plug types.

Q: How long can I run the motor continuously during testing?

A: For 12V motors, do not exceed 30 seconds of continuous operation. For 24V motors, limit runs to 15 seconds or less to prevent overheating. Always allow the tool to cool fully before the next test cycle.

Q: Is there protection against reverse battery connection?

A: Yes. The tool features a reverse connection protection design in the battery clip circuit, reducing the risk of damage from accidental polarity reversal. Always connect red to positive (+) and black to negative (−) as a best practice.