433MHz Wireless Smart Wall Switch 1/2/3 Gang RF Remote Relay

Take Control of Your Lighting — No Wiring Required

The GGBEE 433MHz Wireless Smart Wall Switch is the effortless way to upgrade any home, office, farm, or factory lighting setup. Available in 1, 2, or 3-gang configurations, this sleek 86-panel switch communicates wirelessly with a matching RF relay receiver — giving you remote control over LED lamps, CFL bulbs, fluorescent lights, and ceiling fans from up to 50 metres away. No rewiring, no hub, no complicated app needed.

Made in Mainland China.

Compatible with AC 85V–240V systems (110V & 220V), it works right out of the box. Simply pair the transmitter to the receiver in seconds and enjoy the freedom of wireless control. Multiple switches can control different receivers, so you can cover an entire building efficiently and eliminate dark spots forever.

Key Features

• 433MHz RF Communication — Reliable, interference-resistant wireless signal with up to 50m theoretical range
• 1, 2, or 3 Gang Options — Control one, two, or three lighting circuits from a single panel
• Universal Voltage — Works on AC 85V–240V (50/60Hz) systems worldwide
• LED, CFL & Fluorescent Compatible — Load up to 300W for LED/CFL/fluorescent; up to 2,500W for other loads
• EV1527 Learning Code IC — Pairs with most learning-code receivers on the market
• Ultra-Low Standby Power — Switch draws <1µA; receiver standby <0.3W — energy efficient by design
• CE & RoHS Certified — Meets European safety and environmental standards
• Stick-Anywhere Design — The 86×86mm wall panel can be mounted or adhered to virtually any flat surface — no electrical box required
• Simple Pairing & Reset — Pair in two quick steps; clear all codes with 8 presses of the learning button
• Wide Application — Ideal for homes, offices, farms, factories, and supermarkets

Technical Specifications

Receiver (Controller)

• Working Voltage: AC 85–240V, 50/60Hz
• Working Frequency: 433MHz
• Standby Power Consumption: <0.3W
• Max Load Power: <1,100W
• Receiving Sensitivity: -108dBm
• Modulation: ASK
• Coding: Learning Code
• Operating Temperature: -10°C to +70°C
• Dimensions: 47.4 × 42 × 22.8 mm

Wall Switch (Transmitter)

• Working Frequency: 433MHz
• Standby Power Consumption: <1µA
• Transmitter Power: <10mW
• Modulation: ASK
• Coding: EV1527 Learning Code
• Operating Temperature: -10°C to +70°C
• Dimensions: 86 × 86 × 15 mm

How to Pair & Clear

Pairing (Learning the Signal)

1. Press the Learning Button on the Receiver twice, then wait 3 seconds.
2. Press the desired button on your wall switch transmitter, then wait 3 seconds. Pairing is complete!

Clearing All Codes

1. Press the Learning Button on the Receiver 8 times, then wait 3 seconds. All stored codes are erased.

Related Products You May Like

• 1-Channel SCR Solid State Relay Module DC3-24V 40A Optocoupler
• 10-Pack 12V 3-Pin PC Fan Extension Cable 26cm – CPU GPU Cooler

Safety & Standards

For guidance on safe installation and use of electrical switches and devices in your home, refer to the U.S. Consumer Product Safety Commission – Electrical Safety resource centre. Always ensure wiring and installation comply with your local electrical codes.

Learn more: Wireless light switch

Frequently Asked Questions

Q: Does the wireless smart wall switch need a neutral wire to install?

A: No — the wall switch transmitter is battery-free and draws virtually no power (<1µA standby), so it does not require a neutral wire. The RF relay receiver connects to your existing wiring and operates on AC 85–240V. This makes installation much simpler than traditional smart switches.

Q: How many wall switches can I pair to one 433MHz relay receiver?

A: The receiver uses EV1527 learning code technology and can be paired with multiple transmitters simultaneously. This means you can control a single receiver (and its connected light or fan) from several wall switch panels — perfect for large rooms or multi-entry areas.

Q: Is the GGBEE 433MHz switch compatible with LED bulbs?

A: Yes. The switch is fully compatible with LED, CFL, and fluorescent lamps (up to 300W load) as well as other loads such as incandescent bulbs and ceiling fans (up to 2,500W). It works with AC 85V–240V, covering both 110V and 220V electrical systems.

Q: What is the effective remote control range of this wireless switch?

A: The 433MHz RF signal offers a theoretical range of up to 50 metres in open space. Actual range may vary depending on walls, obstacles, and local RF interference, but it is more than sufficient for typical home and commercial room sizes.