Adjustable Garden Drip Irrigation Kit – Balcony Flowerpot

Keep Your Plants Perfectly Watered — Automatically

Tired of hand-watering your balcony plants every day? The Shunmaii Adjustable Garden Drip Irrigation Kit takes the guesswork out of plant care. This complete misting and drip irrigation system connects directly to your tap and delivers a fine, consistent spray to every flowerpot and planter — saving you time, water, and effort.

With 10 precision copper misting nozzles, a 5-meter flexible hose, and all the connectors you need, this kit is ready to install in minutes — no tools or special plumbing knowledge required. Perfect for balconies, patios, greenhouses, indoor plant walls, and garden beds.

Made in Mainland China.

Why You'll Love This Irrigation Kit

• 🌿 Ultra-fine mist spray — only 0.3mm nozzle hole diameter for even, gentle watering that won't damage delicate plants
• 💧 Low water consumption — uses up to 10× less water than traditional air-humidifying systems
• 🔩 Copper & stainless steel nozzles — forged stainless steel propeller lasts 1.5× longer than standard nozzles
• 🚰 Standard tap compatible — simply connect the included adapter to any normal tap; no pump required
• ⚙️ Easy DIY installation — step-by-step setup in under 15 minutes, recommended at 2.5–3m height
• 🌡️ Multipurpose use — ideal for plant watering, cooling, humidifying, greenhouse misting, and dust removal
• 📦 Everything included — complete kit with hose, nozzles, connectors, tee fittings, and mounting hardware

What's in the Box

• 1 × 5m (16.4 ft) 4/7 Flexible Hose
• 1 × Inner Thread Tap Connector
• 1 × 1/4 Barbed Tee
• 1 × 4/7 Nipple
• 9 × 4/7 Tee Connectors
• 10 × Copper Misting Nozzles

Product Specifications

Easy 9-Step Installation

1. Install the system at a recommended height of 2.5–3m for best coverage.
2. Connect the adapter to your tap.
3. Flush the system with running water for 1 minute to clear debris.
4. Connect the nozzles to the tee hose connectors (all except the last nozzle).
5. Flush again for 2 minutes to fully clean the system.
6. Shut the water off and connect the last nozzle, then apply the terminal cap.
7. Secure the hose with the included belts and mounts.
8. Turn on the water and enjoy automatic plant watering!
9. When not in use for extended periods, close the nozzles and keep clean and dry.

Related Products You May Like

• 14-Piece Vegetable Chopper Slicer Dicer Set – 12-in-1 Kitchen Tool
• 100-Pack Disposable Nitrile Gloves – Latex-Free, White, Oil-Proof

For more guidance on water-efficient gardening and irrigation best practices, visit the EPA WaterSense Watering Tips page.

Frequently Asked Questions

Q: Does the garden drip irrigation kit work with any standard outdoor tap?

A: Yes! The kit includes an inner thread tap connector that is compatible with standard tap fittings. Simply attach the adapter to your existing outdoor or balcony tap — no special plumbing or pump required.

Q: How many plants can this drip irrigation system water at once?

A: The kit includes 10 copper misting nozzles and 9 tee connectors, allowing you to water up to 10 flowerpots or planting zones simultaneously along the 5-metre hose run. You can position each nozzle over an individual pot for targeted watering.

Q: Is the misting spray gentle enough for delicate flowers and seedlings?

A: Absolutely. The nozzles feature an ultra-fine 0.3mm hole diameter that produces a micro-mist spray via a centrifuge vortex mechanism. This gentle mist is perfect for seedlings, herbs, balcony flowers, and any plants that need consistent moisture without being over-watered or damaged by strong jets.

Q: How do I maintain the irrigation kit to keep the nozzles from clogging?

A: After each use, or when storing for a longer period, close the nozzles and keep them clean and dry. Before first use and after storage, always flush the system with running water for 1–2 minutes to clear any sediment. The copper and stainless steel nozzles are corrosion-resistant for long-lasting, clog-free performance.