COB LED Rechargeable Headlamp – Motion Sensor, 400LM, IP65

ZHIYU COB LED Rechargeable Headlamp with Motion Sensor & Magnetic Base

Meet the ultimate hands-free lighting companion for camping, fishing, hiking, and DIY work. The ZHIYU XW005 COB LED Headlamp combines a powerful 400-lumen output with a smart motion-sensor switch, a detachable flashlight module, and a strong magnetic base — all in one compact, rechargeable unit. Whether you're navigating a trail at night, working under your car, or setting up camp, this headlamp keeps your hands free and your path brilliantly lit.

Key Features

• 400 Lumens, 180° Wide-Angle COB Flood Beam – Broad, even illumination ideal for close-up tasks and wide-area visibility.
• 9 Lighting Modes – COB Strong / Medium / Flash → XPE Strong / Medium / Flash → Side White Light → UV Light → Red-Blue Warning Flash. Cycle through with a single button click.
• Hands-Free Motion Sensor Switch – Wave your hand in front of the sensor to toggle on/off without touching the lamp — perfect when wearing gloves or keeping hands clean.
• Detachable 2-in-1 Design – Detach the front flashlight unit and use it as a standalone torch. In standalone mode, the sensor converts to a one-press off button for instant control.
• Strong Side Magnets – Snap the lamp onto any magnetic surface (car hood, toolbox, tent pole bracket) for completely tool-free, stationary lighting.
• USB-C Rechargeable, 1200mAh Built-In Battery – Fully charged in ~3 hours; runtime of 2–8 hours depending on mode. Red indicator flashes when battery is low.
• IP65 Waterproof & 1.5m Drop-Resistant – Sealed against dust and water jets, built to handle tough outdoor and workshop conditions.
• UV Light Mode – Useful for detecting stains, verifying banknotes, and identifying certain materials.
• Red-Blue Warning Flash – Increases your visibility to others in low-light or roadside situations.
• Silicone Body + Adjustable Reflective Headband – Lightweight (97g), comfortable, and built to stay put during active use.

Specifications

Lighting Mode Breakdown

Headlamp Mode (attached)

1. COB Strong (400LM, ~2.5–3H) → COB Medium (130LM, ~3.5–4H) → COB Flash
2. XPE Strong (120LM) → XPE Medium (50LM) → XPE Flash
3. Side White Light → UV Light → Red-Blue Warning Flash

Tip: After 10 seconds in any mode, a second click instantly powers off without cycling through all modes.

Standalone Flashlight Mode (detached)

1. XPE Strong → XPE Medium → XPE Flash → Side White → UV → Red-Blue Flash
2. Sensor switch becomes a single one-press off button in this mode.

What's in the Box

• 1 × COB LED Headlamp (XW005)
• 1 × Adjustable Silicone Headband (with reflective strip)
• 1 × USB-C Charging Cable

Great For

• Camping, hiking & trail running
• Night fishing
• Automotive & home repairs
• Emergency preparedness
• Reading in low light
• Search and inspection tasks

For general outdoor safety lighting guidance, visit the Ready.gov Emergency Preparedness Kit guide.

Related Products You May Like

• 1.2m Foam Pool Noodle – Hollow Float Stick for Kids & Family
• 1.1M Eagle Hawk Kite Bird Scarer – Garden Bird Repellent
• 1.2M Carbon Fiber Invisible Selfie Stick for DJI & Insta360

Frequently Asked Questions

Q: Can I use the COB LED headlamp as a standalone flashlight without wearing it?

A: Yes! The XW005 features a detachable 2-in-1 design. Simply separate the front XPE flashlight module from the headband unit and use it independently as a handheld torch. In standalone mode, the motion sensor automatically converts to a convenient one-press power-off button.

Q: How long does the battery last on a full charge?

A: Runtime ranges from approximately 2 hours on maximum COB strong mode (400LM) up to 8 hours on the lowest XPE or side-light settings. The built-in 1200mAh lithium battery recharges fully via USB-C in about 3 hours. A red flashing indicator alerts you when it's time to recharge.

Q: Is this headlamp waterproof enough for use in the rain or near water?

A: The XW005 carries an IP65 waterproof rating, meaning it is fully protected against dust and low-pressure water jets from any direction — making it suitable for use in rain, splashing, and humid outdoor environments. It is not designed for submersion.

Q: How does the motion sensor switch work?

A: The built-in proximity/induction sensor detects hand movement in front of the lamp. Simply wave your hand near the sensor head to toggle the light on or off — no need to physically press a button. This is especially handy when your hands are occupied, gloved, or dirty.

Q: What does the magnetic base do?

A: Strong side-mounted magnets allow you to attach the headlamp directly to any ferromagnetic metal surface — such as a car hood, toolbox, metal shelving, or workshop equipment — freeing both hands for tasks while keeping the light aimed exactly where you need it.