DC 12V Timer Delay Relay Module Cycle Switch Optocoupler Isolation

Discover the DC 12V Timer Delay Relay Module Cycle Switch Optocoupler Isolation, a standout decor pick designed for dependable everyday performance and lasting value.

Specifications

Brand Name: Aideepen

Certification: NONE

DIY Supplies: Electrical

Data Record: No

Electronic: No

Material: Plastic

Semi-finishedproduct: No

Module Highlights:

1. Wide voltage input range: 6–12 V DC

Supports 5.0 V power supply via micro USB, making it very convenient to use;

2. Clear and simple interface with powerful, easy-to-understand features that meet virtually all your needs;

3. Features a one-touch emergency stop function (STOP button) with reverse polarity protection to prevent damage from incorrect connections;

4. Added sleep mode: when enabled, the display automatically turns off after 5 minutes of inactivity; press any button to wake it up;

5. Different OP, CL, and LOP parameters can be set; these parameters are independent of each other and saved separately;

6. All settings are automatically saved when power is lost

Operating Modes:

P1: After the signal is triggered, the relay remains energized for the OP time, then de-energizes; during the OP time, the following operations occur

P1.1: Subsequent signal triggers are ignored;

P1.2: Subsequent signal triggers restart the timer;

P1.3: Subsequent signal triggers a reset; the relay de-energizes and the timer stops;

P-2: Upon receiving a trigger signal, the relay de-energizes for CL time, then energizes for OP time; after the timer completes, the relay de-energizes;

P3.1: Upon receiving a trigger signal, the relay remains energized for OP time, then de-energizes for CL time, and repeats the above cycle. If a signal is received again during the cycle, the relay de-energizes and timing stops; the number of cycles (LOP) is configurable;

P3.2: Upon power-up, without a trigger signal, the relay remains energized for OP time, then de-energizes for CL time, and repeats the above cycle; the number of cycles (LOP) is configurable;

P-4: Signal Hold Function If a trigger signal is present, the timer resets and the relay remains energized; when the signal disappears, the relay de-energizes after the OP time elapses; if a signal is received during the timing period, the timer resets;

Product Specifications:

1: Operating Voltage: DC 6 to 12V (supports 5.0V power supply via micro USB)

2: Trigger Signal Source: High-level trigger (3.0V–24V)

The signal ground is isolated from the system ground to enhance the system’s immunity to interference

(Can also be shorted to share a common ground)

3: Output Capability:

Can control devices with DC up to 30V 5A or AC up to 220V 5A

4: Quiescent Current: 20mA; Operating Current: 50mA

5: Service Life: Greater than 100,000 cycles;

Operating Temperature: -40–85°C;

Dimensions: 6.2 × 3.8 × 1.7 cm

6: Features optocoupler isolation to enhance anti-interference capability; industrial-grade circuit board; set parameters are permanently retained after power loss.

How to select the timing range:

After setting the parameter values on the mode selection screen, briefly press the STOP button to select the timing range

XXX. Decimal point in the ones place, timing range: 1 second–999 seconds

XX.X: Decimal point in the tens place; timing range: 0.1 seconds – 99.9 seconds

X.X.X.: All decimal places lit; timing range: 1 minute – 999 minutes

For example, if you want to set OP to 3.2 seconds, move the decimal point to the tens place; the display will show 03.2

Parameter Description:

OP: On-time, CL: Off-time

LOP: Number of cycles (1–999; “---” indicates infinite cycles)

These parameters are independent of each other but are shared across all modes.

For example, if the on-time (OP) is set to 5 seconds in mode P1.1, and the user switches to mode P1.2, the OP will remain 5 seconds when entering P1.2 to configure the corresponding parameters

On the main screen (displaying 000), briefly press the SET button to display OP (CL, LOP) and the corresponding time XXX.

If a mode contains only OP (e.g., modes P1.1, P1.2, P1.3), briefly pressing the SET button will display only OP and the corresponding time.

If the mode includes OP, CL, and LOP (e.g., modes P3.1, P3.2), a short press of the SET key will display OP and its corresponding time, CL and its corresponding time, and LOP and its corresponding count.

After setting the mode, you can easily view the parameters configured for the current mode by short-pressing the SET key on the main interface, which is very convenient.

How to Set Parameters

1. First, determine the relay’s operating mode.

2. Based on the relay’s operating mode, on the main screen (when the module powers on, the current operating mode will flash briefly [default mode P1.1], then the main screen will appear), “press and hold the SET button for 2 seconds, then release” to enter the mode selection screen. Use the UP and DOWN buttons to select the mode you wish to set (P1.1–P4).

3. After selecting the mode to configure (e.g., P3.2), briefly press the SET key to set the corresponding parameters. The parameter to be set will flash (OP On-time, CL Off-time, LOP Cycle Count (“---” indicates infinite cycles). Use the UP and DOWN keys to adjust the parameter values; both long press (rapid increase or decrease) and short press (increase or decrease by 1 unit) are supported; After setting the parameter value, press the STOP button briefly to select the decimal point position and choose the timing range (0.1 seconds to 999 minutes). Press the SET button briefly to set the next parameter for the current mode; the process is the same as above

4. After setting the parameters for the selected mode, press and hold the SET button for 2 seconds, then release it. The currently set mode will flash once, and the device will return to the main interface, indicating successful parameter configuration—it’s very simple

Main Interface: Displays “000” (without a decimal point) when the relay is inactive; displays a decimal point when the relay is active, making it very clear.

Mode Selection Interface: Press and hold the SET button to enter; press and hold the SET button again to exit and return to the main interface.

STOP Button Function Expansion

Relay Enable Mode

1. ON: The relay is allowed to conduct during the ON duration.

2. OFF: The relay is prohibited from conducting and remains in the off state.

Press the STOP button briefly on the main screen to toggle between ON and OFF. The current status will flash, and the display will return to the main screen. (This function serves as an emergency stop, allowing you to disconnect a closed relay with a single press.)

Sleep Mode:

C-P Sleep Mode: If no operation occurs within five minutes, the LED display automatically turns off, and the program continues to run normally.

O-d Normal Mode: The LED display remains on at all times.

Press and hold the STOP button for 2 seconds, then release to toggle between C-P and O-d modes. The current status will flash, and the device will return to the main interface.

Product List

1x Relay Module

Options

• Color: 10pcs, 5pcs, 1pcs

Frequently Asked Questions

Q: What is the DC 12V Timer Delay Relay Module Cycle Switch Optocoupler?

A: The DC 12V Timer Delay Relay Module Cycle Switch Optocoupler is a quality decor pick. Wide voltage input range: 6–12 V DC Supports 5.0 V power supply via micro USB, making it very convenient to use; 2.

Q: What is the DC 12V Timer Delay Relay Module Cycle Switch Optocoupler made of?

A: The DC 12V Timer Delay Relay Module Cycle Switch Optocoupler is made from Plastic Semi-finishedproduct, measuring 6.2.

Q: Why choose the DC 12V Timer Delay Relay Module Cycle Switch Optocoupler?

A: The DC 12V Timer Delay Relay Module Cycle Switch Optocoupler stands out in our decor range — Clear and simple interface with powerful, easy-to-understand features that meet virtually all your needs; 3.