PIR Motion Sensor LED Strip Light DC12V Waterproof 1M–5M

Smart Motion-Activated LED Strip – Light Up Only When You Need It

Never fumble for a light switch in the dark again. The GGBEE PIR Motion Sensor LED Strip Light automatically turns on the moment it detects movement and switches off after a set delay — saving energy and adding effortless convenience to any room. Perfect as an under-cabinet lamp, stair light, closet light, bedside nightlight, or hallway accent, this strip delivers clean, bright illumination exactly where and when you need it.

Made in China.

Key Features

• Auto On/Off Motion Sensing: Built-in PIR sensor detects motion within 1–5 metres and activates the lights instantly in dark or low-light conditions.
• Adjustable Time-Delay: Choose how long the light stays on after motion stops — anywhere from 30 seconds to 5 minutes — so it suits your exact routine.
• Choose Your Colour Temperature: Available in crisp Cool White (5800K–6500K) or cosy Warm White (2800K–3200K) to match your décor and mood.
• Flexible Length Options: Select from 1M, 3M, or 5M strips to fit cabinets, wardrobes, stairways, bed frames, and more.
• Dense 60 LEDs/Metre: SMD LEDs packed at 60 per metre deliver smooth, even light with up to 2,000 lumens of output and a rated lifespan of 50,000 hours.
• IP65 Waterproof: Sealed against moisture splashes, making it safe for kitchens, bathrooms, and damp areas.
• DC 12V Safe & Efficient: Low-voltage DC power source keeps running costs minimal and ensures safe operation near beds, children's rooms, and cabinets.
• CE Certified: Meets European safety standards for peace of mind.

Specifications

Where to Use It

This motion sensor LED strip is incredibly versatile. Install it under kitchen cabinets for hands-free task lighting, line stair edges for safe nighttime navigation, light up wardrobes and closets automatically, or use it as a soft bedside nightlight that won't disturb your sleep. It also works beautifully in corridors, hallways, and living rooms.

Important Tips

• The PIR sensor is designed to activate only in dark or low-light environments — always test the strip in darkness.
• Before troubleshooting, double-check that the strip is connected correctly. An incorrect connection may cause the light to stay on continuously or not light up at all.
• A DC 12V power adapter is required (not included). Please ensure you have a compatible adapter before use.

Related Products You May Like

• 1.4W Solar Bird Bath Fountain Pump – 6 Nozzles & 4 Bars
• 1-Channel SCR Solid State Relay Module DC3-24V 40A Optocoupler
• 10-Pack 12V 3-Pin PC Fan Extension Cable 26cm – CPU GPU Cooler

For general guidance on LED lighting energy efficiency, visit the U.S. Department of Energy – LED Lighting resource page.

Frequently Asked Questions

Q: Does the PIR motion sensor LED strip work with the lights on in the room?

A: No — the built-in PIR sensor is designed to activate only in dark or dim environments. If the room lights are already on, the strip will not trigger. This makes it ideal as an automatic nightlight or after-dark accent light.

Q: What power supply do I need for the DC12V LED motion sensor strip?

A: You will need a DC 12V power adapter (not included). Make sure the adapter's wattage is sufficient for the strip length you choose. For a 5M strip at 60 LEDs/metre, a 12V adapter rated at least 2A is typically recommended.

Q: Can I cut the motion sensor LED strip to a custom length?

A: Most SMD LED strips can be cut at marked cutting points (usually every 3 LEDs or ~5cm intervals). Check the strip you receive for cut marks, and always disconnect power before cutting.

Q: Is the IP65 waterproof rating safe for use in a bathroom or near a sink?

A: IP65 means the strip is protected against water jets from any direction, making it suitable for areas exposed to splashes such as kitchen counters and bathroom vanities. It is not designed for full submersion in water.

Q: How do I adjust the time-delay setting on the motion sensor LED strip?

A: The strip features an adjustable time-delay dial or control (located on the sensor unit) that lets you set how long the lights remain on after motion is last detected — from as short as 30 seconds up to 5 minutes. Simply turn the dial to your preferred setting.