Solar Street Light Controller Board PIR Motion Sensor & Remote

Solar Street Light Driver Board – Smart PIR Motion Detection & Remote Control

Upgrade or repair your solar street lighting system with this compact, versatile Solar Lamp Board Controller Module by ALLOYSEED. Featuring built-in infrared (PIR) human body motion detection, three lighting modes, and a remote control for easy brightness and mode adjustment — this board makes solar street light installation, retrofitting, and repair straightforward and efficient.

Made in Mainland China.

Key Features

• Dual Battery Compatibility: Works with both 3.2V lithium iron phosphate (LiFePO4) and 3.7V ternary lithium batteries — just ensure your battery has a built-in protection board, as this controller does not include overcharge/over-discharge protection.
• PIR Infrared Motion Sensor: Detects human body movement within a 5–10 metre range with a fast ~10-second response window. Perfect for driveways, pathways, gardens, and parking areas.
• Three Lighting Modes: Switch between Induction Mode (motion-triggered high brightness + low brightness standby), Constant Light Mode, and Light Off — all via the included remote or onboard switch.
• Remote Control Included: Conveniently adjust brightness levels and lighting modes from a distance. Note: requires a AAA (No. 7) battery, sold separately.
• Pre-Soldered Connection Wires: Simplifies installation, retrofitting, and repair — no complex soldering required.
• Compact & Lightweight: At just 105 × 40 × 10 mm, this board fits easily into existing solar light housings and is ideal for on-site adjustments.
• Honest Power Ratings: Rated light output power: 3V < 9W (beware of market products falsely marked as 90W). Solar panel input: 5V–6V < 20W.
• Durable PC+ABS Construction: Lightweight yet resilient materials ensure long-lasting performance in outdoor environments.

Specifications

What's in the Box

• 1 × Solar Lamp Controller Board
• 1 × Remote Control (AAA battery not included)

Important Notes

⚠️ This control board does not include overcharge or over-discharge protection. Always connect a battery that has its own built-in protection board. Due to manual measurement, please allow ±1–2 cm dimensional variance. Colours may vary slightly due to monitor settings.

Ideal For

• Solar integrated street light modification or repair
• Garden, pathway, driveway, and yard solar lighting
• DIY solar energy projects and electronics enthusiasts
• Replacing faulty driver boards in existing solar fixtures

For more information on solar energy safety and efficiency standards, visit the U.S. Department of Energy – Solar Lighting Guide.

You May Also Like

• 10-Pack 22AWG Glass Tube Fuse Holder 5x20mm & 6x30mm Screw
• 100W Dual-Port Car Charger – Fast Charging
• 140W USB-C Fast Charger with Auto Power-Off Overcharge Protection

Frequently Asked Questions

Q: What batteries are compatible with this solar lamp controller board?

A: This solar street light driver board is compatible with both 3.2V lithium iron phosphate (LiFePO4) batteries and 3.7V ternary lithium batteries. Since the board itself does not have built-in overcharge or over-discharge protection, it is essential that your battery includes its own built-in protection board to prevent damage.

Q: How does the PIR infrared motion sensor work on this controller module?

A: The infrared human body induction sensor detects movement within a 5–10 metre range. When motion is detected, the light automatically switches to high brightness. After approximately 10 seconds of no detected movement, it returns to a low brightness standby mode. You can also switch to constant light mode or turn the light off entirely using the three-gear switch or the included remote control.

Q: Does the remote control come with a battery?

A: No — the included remote control does not come with a battery. You will need to purchase a AAA (No. 7) battery separately before using the remote to adjust brightness or lighting modes.

Q: Can this board be used to repair or modify an existing solar street light?

A: Yes! This solar lamp controller module is specifically designed for use in solar integrated street light modification and repair. The pre-soldered connection wires simplify the installation process, making it easy to retrofit into existing solar street light housings without complex soldering work.