WS2811 RGB LED Strip 5M DC 12V SMD5050 Addressable | HVIERO

HVIERO WS2811 Addressable RGB LED Strip Light — 5 Metres of Vivid Full-Colour Magic

Transform any space with the HVIERO WS2811 SMD5050 RGB LED Strip. Whether you're adding ambient glow to a bookcase, backlighting a TV, outlining a ceiling, or dressing up an outdoor feature, this digitally addressable 5-metre ribbon delivers stunning full-colour animation effects with effortless control. Available in 30 LEDs/m and 60 LEDs/m densities, and in IP30 (indoor), IP65 (outdoor-splash), and IP67 (fully weatherproof) ratings, there's a version for every project. Made in Mainland China.

Key Features

• WS2811 IC Chip — Each group of 3 LEDs is individually addressable for pixel-perfect animation and colour mixing across 256 grey-scale levels per channel.
• SMD5050 Epistar Chips — High-brightness diodes with a wide 120° beam angle deliver vivid, even illumination across every surface.
• Full 24-Bit RGB Colour — Red 650 nm · Green 520 nm · Blue 460 nm; generate millions of colours and dynamic effects including flowing water, raindrop, curtain-up, jump-flash, and more.
• Three Waterproof Ratings
  • IP30 — No silicone coating; ideal for dry indoor use.
  • IP65 — Silicone-coated; splash-resistant, cuttable, suitable for outdoor accents.
  • IP67 — Full silicone tube enclosure; dust-proof and submersion-resistant for demanding outdoor installations.
• Easy to Install — Peel-and-stick 3M adhesive backing (IP30/IP65) adheres to most clean, dry surfaces in seconds.
• Cuttable Every 3 LEDs — Trim the strip to your exact length at the marked cut lines without losing functionality.
• Software-Editable Animations — Program custom effects using CorelDraw, Flash, LedEdit, and other compatible LED control software.
• Long 50,000-Hour Lifespan — CE & RoHS certified; no high-concern chemicals.

Specifications

Applications

Perfect for living rooms, home theatres, bookshelves, wine cabinets, kitchen under-cabinet lighting, ceilings, windowsills, staircases, shop displays, garden features, and DIY decorative lighting projects — indoors and out.

What's in the Box

• 1 × 5-metre WS2811 SMD5050 RGB LED Strip (variant as selected)

Note: Controller, power supply, and batteries are NOT included. A DC 12V power supply and a compatible WS2811 controller are required for operation.

Usage Tips

• Always use a stable DC 12V power supply rated for your total strip wattage.
• Pair with a WS2811-compatible controller for the best animation results.
• Clean and dry the mounting surface thoroughly before applying the adhesive backing.
• Cut only at the clearly marked cut lines every 3 LEDs.
• Do not submerge IP30 or IP65 versions in water.

Related Products You May Like

• 1-Channel Relay Module DC 3.3V–24V Optocoupler for Arduino
• 0.25mm 1000-Turn Precision Copper Inductor Coil for DIY Circuits

For general guidance on safe use of electrical lighting products and energy efficiency, visit the U.S. Department of Energy — Lighting Choices.

Frequently Asked Questions

Q: What controller do I need for the WS2811 addressable LED strip?

A: You need a WS2811-compatible LED controller (sometimes labelled SP105E, SP108E, or similar). These controllers communicate via a single-wire data signal and allow you to program animations, colours, and effects. Many are app-controlled via Bluetooth or Wi-Fi. Always check the controller is rated for DC 12V and your total LED wattage before purchasing.

Q: What is the difference between IP30, IP65, and IP67 on this LED strip?

A: IP30 has no protective coating and is best for dry indoor locations. IP65 features a silicone coating that resists moisture splashes, making it suitable for outdoor accents and damp environments — it can still be cut. IP67 uses a full silicone tube enclosure providing dust-proof and immersion-resistant protection for demanding outdoor or garden installations, but it does not have adhesive backing.

Q: Can I cut the WS2811 LED strip to a custom length?

A: Yes. The strip is cuttable at clearly marked lines every 3 LEDs (approximately every 5 cm on the 60 LEDs/m version). Cutting at these points retains full functionality of the remaining strip. Always power off the strip before cutting.

Q: What power supply do I need for a 5-metre 60 LEDs/m roll?

A: At 0.3W per LED, a 5-metre × 60 LEDs/m strip consumes up to 90W. Choose a DC 12V power supply rated at least 8A (96W or higher) to ensure stable operation and allow a small safety headroom.